Nexigo PJ10 Mode D'emploi page 13

All manuals and user guides at all-guides.com
Supported
Resolution
AV CONNECTIONS
In order to use a device with a standard RCA connection you will
need to obtain an RCA to 3.5 mm adapter. Connect the adapter to
the projector as shown below, and then connect the RCA plugs
from the device to the RCA jacks on the adapter. You can also just
use a singular AV cable if this is an option for your device. Once
connected, go into the on-screen menu and select
Source as shown below.
Support Format: NTSC/PAL
640x480 1280x720
800x600 1280x800
1024x768 1280x1024
1366x768 1600x1200
1440x900 1680x1050
1440x960 1920x1080
AV under
KEYSTONE
Input
US 12