Uline S-25309 Mode D'emploi page 2

WARNING! It is the responsibility of the user to
operate the pump in conformance with OSHA
rules for dispensing liquids. Failure to follow all
warnings and general safety information can
result in death, personal injury and/or property
damage.
• Never pump flammable or explosive chemicals.
• Never pump hot liquids.
• Wear safety glasses at all times when working with
pumps.
WARNING! In order to properly use this product,
familiarize yourself with the pump and liquid to
be siphoned. Not suitable for all liquids.
1. Prior to use, read operating instructions.
PAGE 2 OF 9
SPECIFICATIONS
Flow rate per stroke
Inlet/Outlet
Bung Adapter
Suction Tube (Length and Material)
Wetted Parts
Maximum Viscosity
Maximum Temperature
INSTALLATION
2 GPM
0.59"
2" Polyethylene
34" Polyethylene
Polyethylene
300 cps
140° F
SAFETY
• Wear a face shield, proper apparel and respiratory
protective equipment when pumping hazardous
chemicals as set forth in the United States OSHA
Safety Data Sheet.
• Neutralize and/or clean up spills immediately.
• Rinse thoroughly after use.
2. Determine the depth of the container in which
pump will be inserted. If the length of suction tube
is greater than container depth, cut tube at a 30°
angle to fit container. Use caution when cutting tube.
3. Product not threaded. Includes dust cap for pull-out
spouts.
0323 IS-25309