Publicité
FEDERAL COMMUNICATIONS COMMISSION (FCC) COMPLIANCE NOTICES
This section includes the following FCC statements for Burst Pro Air
• FCC ID: XGB-CM300D (Wireless Dongle); FCC ID: XGB-CM300 (Wireless Gaming Mouse)
• Class B Interference Statement
• RF Radiation Exposure & Hazard Warning
CLASS B INTERFERENCE STATEMENT
Caution: Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate this equipment.
This equipment has been tested and found to comply with the limits for a Class B digi-
tal device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not in-
stalled and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC CAUTION:
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
RF RADIATION EXPOSURE & HAZARD STATEMENT
This equipment complies with FCC radiation exposure limits set forth for an uncon-
trolled environment. End users must follow the specific operating instructions for
satisfying RF exposure compliance. This transmitter must not co-located or operating
in conjunction with any other antenna or transmitter.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
INNOVATION, SCIENCE AND ECONOMIC DEVELOPMENT CANADA
(ISED) COMPLIANCE NOTICES
This section includes the following ISED statements for Burst Pro Air
• IC: 3879A-CM300 (Wireless Gaming Mouse); IC: 3879A-CM300D (Wireless Dongle)
• Class B Interference Statement
• RF Radiation Exposure & Hazard Warning
CANADIAN ICES STATEMENTS
This device complies with Industry Canada's licence-exempt RSSs.
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference
that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage;
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
RF RADIATION EXPOSURE & HAZARD STATEMENT
The product complies with Canada portable RF exposure limits set forth for an uncontrolled
environment and are safe for intended operation as described in this manual. The further RF
exposure reduction can be achieved if the product can be kept as far as possible from the
user body or set the device to lower output power if such function is available.
EXPOSITION AUX RADIATIONS RF & MENTION DE DANGER
Le produit est conforme aux limites d'exposition pour les appareils portables RF pour les
Etats-Unis et le Canada établies pour un environnement non contrôlé Le produit est s
un fonctionnement tel que décrit dans ce manuel. La réduction aux exposition RF peut être
augmentée si l'appareil peut être conservé aussi loin que possible du corps de l'utilisateur
ou que le dispositif est réglé sur la puissance de sortie la plus faible si une telle fonction
est disponible.
EUROPEAN UNION AND EUROPEAN FAIR TRADE ASSOCIATION
REGULATORY COMPLIANCE
DECLARATION OF CONFORMITY
Hereby, Voyetra Turtle Beach Inc. declares that Burst Pro Air is in
compliance with Directive 2014/30/EU(EMC), 2014/53/EU(RED),
2014/35/EU(Safety), 2015/863 amending Annex II to 2011/65/
EC(RoHS), 2012/19/EU (WEEE), 2006/1907/EU (REACH), 94/92/EU
(PACKAGING), 2006/66/EU (Battery), Electromagnetic Compatibility
Regulations 2016(EMC), Radio Equipment Regulations 2017(Radio),
Electrical Equipment Regulations 2016 (Safety), The Restriction of the Use
of Certain Hazardous Substances in Electrical and Electronic Equipment
Regulations 2012.
The full text of the EU/UK declaration of conformity is available at the
following internet address: http://www.turtlebeach.com/homologation
Radio frequency: 2400MHz
Operating frequency: 2400~2483.5MHz
Max. Output power: 10dBm
VOYETRA TURTLE BEACH, INC. | 44 SOUTH BROADWAY, 4TH FLOOR, WHITE PLAINS NY 10601, USA
© 2022 Voyetra Turtle Beach, Inc. All rights reserved. Any product names mentioned in this manual may be trademarks or registered trademarks and are the
property of their respective owners. Information contained herein is subject to change without notice. Voyetra Turtle Beach, Inc. shall not be made liable for any
errors that may appear in this manual. This publication or parts of it may not be reproduced without the express consent of the publisher.
r pour
ȗ
ROCCAT
is a Turtle Beach Brand.
®
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure
and for compensation for anyother reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or r placed if the goods fail to be of
acceptable quality and the failure does not amount to a major failure.
BSMI 限用物質聲明表查詢,請上 https://www.roccat-neon.com/Bsmi
GENERAL SAFETY GUIDELINES AND INTENDED USE
1. Do not open or modify the product.
2. Not approved changes or modifications may void the operation
authority and/or warranty.
3. In case of trouble or doubt, contact us immediately.
4. Keep the product away from fire/water/humidity/temperature extremes.
5. Only use as intended with a compliant PC and connector part.
6. Improper or incorrect use of the product or use of the product for purposes
not recommended by the manufacturer void the liability and/or warranty.
7. Don't look into the light beam on bottom of the mouse.
Publicité
