Publicité
Les langues disponibles
Les langues disponibles
2. Line up the mounting template (Z) over the
horizontal line and mark the location of the
mounting bracket holes with a pencil.
3. Drill 5/16" holes for plastic anchors (C) using
5/16" drill bit.
4. Press plastic anchors (C) into the holes until
flush with surface. Use hammer if necessary.
5
5. Using the Phillips screwdriver, install the
mounting brackets (D) with the 2" wood screws
(F).
6. Hang the mirror (A) and level if needed.
Please refer to Homeowner Care Manual for care and maintenance information.
6
Publicité
