Canvas ANDERSON 068-7826-4 Instructions De Montage page 17

Step 11
Requires S, 15, 16, 17, 18
Carefully turn your unit over onto its front edges. Unfold the BACK (S) and lay it over
your unit.
Place packing material under the angled ends to stabilize the unit.
Make equal margins along all four edges of the BACK (S). Push on opposite corners of
your unit if needed to make it "square".
Fasten the BACK (S) to your unit using fi fty NAILS (17).
NOTE: Perforations have been provided for access through the BACK. Carefully cut out
the holes needed.
Fasten the remaining BALLAST (16) to the BOTTOM (I) exactly as shown. Use four
BLACK 2-9/16" BOLTS (18) and four FLAT WASHERS (15).
15 16
18
Do not use this
hole in this step.
These perforations
must be here.
Place packing
material here to
stabilize the unit.
All manuals and user guides at all-guides.com
17
17
These holes must line up
over the SHELVES.
Unfi nished surface
S
I
16
17
15 18