Square Stand Mode D'emploi page 3

SET UP SQUARE STAND AND SQUARE READER
Pull out the security pin on the 2 Push the security pin into the
1
left side of Square Stand. Place headset jack of your iPad to
your iPad into Square Stand and secure it to Square Stand.
connect your iPad to the
Lightning connector.
Plug the dock's USB cable into
5 Grab your Square Reader and
the hardware hub.
Dock for Square Reader. Remove
the retainer clip from the dock.
Slide Square Reader into the
dock's micro USB connector.
Replace the retainer clip.
Need help? Get answers at square.ca/hardware-setup.
All manuals and user guides at all-guides.com
3 Connect the hardware hub. It has 4 Plug in the power adapter cable.
two cables: one that connects to One end goes into the power
the bottom of Square Stand and one adapter, and the other end goes
that connects to the power adapter. into a power outlet.
Download the latest version of the
Square app from the App Store.
Create or log in to your Square
account, follow the onscreen
instructions and you're ready to
start selling!
SET UP YOUR COUNTERTOP
Square Stand and Square Reader work best when they're placed within reach of customers. Position Square Stand so customers can enter their PIN and tip on the screen.
Put Square Reader on your countertop so customers can hold their contactless cards or devices near it and insert their chip cards.