Publicité
Les langues disponibles
Les langues disponibles
Ultrasounds
Transmitter telemeter Moduson®3
Ref: 222 094
In this part, we will explain how to use the transmitter telemeter Moduson®3 with one or
two receivers Moduson®.
Power supply
Receiver 1
Moduson®3
(cable jack)
Receiver 2
Moduson®3
(cable jack)
The transducers of the new versions of Moduson® allow a use in the fluids and
in the air.
That is why if there is a change in the environment, it is necessary to adjust the
emission gain (therefore the reception) of the signal in order to obtain signals
which are not deformed in case of a significant gain.
Example of a set-up – Measurement of the speed sound in water
In the case of using receivers Moduson®2, no connection besides the power supply and
the BNC/Banana plug has to be done.
In fact, it will be necessary to connect the receivers Moduson®2 directly on the Foxy
console, because they have connections such as safety banana, of diameter 4mm.
ENGLISH
2.1 Use with receivers Moduson®3 and the Foxy
console
2.2 Use with receivers Moduson®2 and the Foxy
console
To Foxy's analog inputs
6
BNC/Banana
plug to
Foxy's
synchro
input
Publicité
