Maintenance; Cleaning Filters - AirBo Pillar Mode D'emploi

8.3 Placing filters
Replace the new filter(s) in the correct
order and screw the top plate back
on again.

9 Maintenance

Cleaning and maintenance of the Aircleaner Pillar should be carried out
carefully and only when the power cord is unplugged. The housing can be
cleaned: the filters in the filter package should always be replaced, not cleaned!
Ù
When cleaning, make sure that the
Aircleaner Pillar is completely
switched off! For complete
disconnection, also remove the
power cord from the socket!
9.1 Cleaning housing
Clean the housing by wiping it off with a
damp cloth and a non-aggressive detergent.
22 22
Ù
Always position the filters with the
arrows pointing in the direction of
the fan. The filter with the highest
number must always be placed in
the machine first (closest to the fan)!

9.2 Cleaning filters

Dirty filters should always be replaced.
Never clean the filters with a damp cloth,
vacuum cleaner or compressor due to the
fragile lamellar structures, this may impair
the function of the filters!
Ù
DO NOT clean the filters with a
damp cloth or air them out with
a compressor!