Publicité
Les langues disponibles
Les langues disponibles
PROBLEM SOLVING GUIDE
Troubleshooting
WARNING! To reduce the risk of electrical shock or injury from moving parts, unplug
vacuum before servicing or cleaning.
CAUTION! To reduce the risk of electric shock, do not handle plug or appliance with
wet hands.
PROBLEM
CHECK POINT
Power Cord
Vacuum won't
turn on
House Fuse or Breaker
Vacuum Bag
Vacuum won't
pick up or low
Filter
suction
Hose
Bag Compartment Cover
Dust escaping
Filter
from vacuum
Vacuum Bag
Any other service should be performed by an Authorized Service Representative.
To locate your nearest Authorized Retailer, visit our website at
CarpetProVacuums.com or call 866-539-2099.
For Best Performance
• Keep machine and all accessories clean and in good operating condition.
• Change vacuum bags when they are 2/3 full to maintain optimum
cleaning efficiency.
• Change filters when dirt is visible on them or every six months if someone in your
home suffers from allergies. Otherwise, once a year should do for replacing the filters.
• Replace filters frequently if vacuuming fine powders such as flour or drywall dust.
• Always use genuine filters and parts, as use of other products may result in poor
cleaning or filtration performance. Genuine filtration products are designed
for maximum performance.
• Store machine carefully in a dry area.
• For optimum cleaning performance and safety, follow your owner's manual instructions.
14
All manuals and user guides at all-guides.com
POSSIBLE SOLUTION
Plug unit in firmly.
Replace fuse/reset breaker.
Install new bag.
Install new filter.
Remove obstacle.
Reinsert the cover and secure latch.
Review filter installation (page 8).
Review bag installation (page 8).
Publicité
