Manhattan 150705 Mode D'emploi page 2

SuperSpeed USB to SATA Adapter • User Manual
Thank you for purchasing the MANHATTAN
Model 150705. To view a datasheet with a full list of features and specifications,
go to www.manhattan-products.com.
Installation
1. Connect the included power supply to the SuperSpeed USB to SATA
Adapter, then plug the power supply into an AC outlet. The red Power
indicator on the Adapter should light.
2. Connect the Adapter to the SATA
drive.
3. Plug the Adapter into a USB port
on your computer. Installation of the driver(s) is automatic.
CAUTION: Never disconnect the SuperSpeed USB to SATA Adapter from the
computer while data is being transferred, as data loss may occur. MANHATTAN
accepts no responsibility for lost data.
Operation
• Do not use this device outdoors, near heat sources, or in damp or dusty
environments.
• Take extra precautions against electrical discharges when swapping hard-
disk drives.
• Do not handle the drive by its sensitive components or place near speakers,
televisions or other magnetic devices.
2
English
superspeed usB to sata adapter,
®
Power supply
Power indicator
English
SuperSpeed USB
to SATA Adapter