Publicité
Les langues disponibles
Les langues disponibles
SAFETY WARNINGS – READ BEFORE USING
Auto-darkening welding helmets are designed to protect the eyes and face from sparks,
spatter, and harmful radiation under normal welding conditions. An auto-darkening filter
automatically changes from a light state to a dark state when an arc is struck, and it returns
to the light state when welding stops.
Auto-darkening welding helmets come ready for use. The only thing you need to do before
you start welding is adjust the position of the headband and select the correct shade number
for your application.
• This auto-darkening welding helmet is not suitable for laser welding or for oxyacetylene
welding and cutting processes.
• Never place this helmet and auto-darkening filter on a hot surface.
• Never open or tamper with the auto-darkening filter.
• This helmet will not protect against explosive devices or corrosive liquids.
• Do not make any modifications to either the filter or the helmet, unless specified in
this manual. Do not use replacement parts other than those specified in this manual.
Unauthorized modifications and replacement parts will void the warranty and could expose
the operator to the risk of personal injury.
• Should this helmet not darken upon striking an arc, stop welding immediately and contact
your supervisor or your dealer.
• Do not immerse the filter in water.
• Do not use any solvents on the filter screen or helmet components.
• Use only at temperatures: -10 ºC to +55 ºC (14 ºF to 131 ºF).
• Storing temperature: -20 ºC to +70 ºC (-4 ºF to 158 ºF). The helmet should be stored in a
dry, cool, and dark area with the battery removed when not being used for a long time.
• Protect filter from contact with liquid and dirt.
• Clean the filter surface regularly; do not use strong cleaning solutions. Always keep the
sensors and solar cells clean using a clean lint-free tissue.
• Regularly replace cracked / scratched / pitted front cover lens.
• Never try to open the filter cartridge.
• The materials which may come into contact with the wearer's skin can cause allergic
reactions in some circumstances.
• Please install AAA alkaline batteries (2 required) before using this product.
• To prevent damage, please remove the batteries when not being used for a long time.
COMMON PROBLEMS AND REMEDIES
• Irregular darkening or dimming
Headband has been set unevenly and there is an uneven distance from the eyes to the
All manuals and user guides at all-guides.com
WARNING
Read & Understand All Instructions Before Using
WARNING
WARNING
Severe personal injury could occur if the user fails to follow the above
mentioned warnings or fails to follow the operating instructions.
Professional Quality
1
Welding Helmet
Publicité
