Télécharger Imprimer la page

Oceanic OCEASF2000W4 Guide D'utilisation page 16

Publicité

Les langues disponibles

Les langues disponibles

Cool fan
• I 1000 W
• II 000 W
Turn the thermostat control clockwise
until it clicks. Then it will start working and automatically switches itself on and off
cyclically to the current maintain room temperature according to the thermostat
setting.
When you have finished using the appliance:
Select the minimum position by using the thermostat control.
Turn off the appliance by selecting 0 on the power regulator.
Unplug the appliance to the mains.
Carry handle:
This appliance has handles which facilitate comfortable transport.
Safety thermal protector:
The appliance has a safety device, which protects the appliance from
overheating.
When the appliance switches itself on and off repeatedly, for reasons other than
the thermostat control, check to ensure that there are no obstacles that impede
correct air entry or expulsion.
If the appliance turns itself off and does not switch itself on again, disconnect it
from the mains supply, and wait for approximately 15 minutes before
reconnecting. If the machine does not start again, seek authorized technical
assistance.
CLEANING
Disconnect the appliance from the mains and let it cool before undertaking any
cleaning task.
Clean the equipment with a damp cloth with a few drops of washing-up liquid and
then dry.
Do not use solvents, or products with an acid or base pH such as bleach, or
abrasive products, for cleaning the appliance.
Do not let water or any other liquid get into the air vents to avoid damage to the
inner parts of the appliance.
Do not submerge the appliance in water or any other liquid, or place it under a
running tap.
If the appliance is not in good condition of cleanliness, its surface may degrade
and inexorably affect the duration of the appliance's useful life and could become
unsafe to use.
Note: When the appliance is switched on during the heating function, after a long
1
to the desired temperature position
16

Publicité

loading