Sebson MIRROR CAB C90 Manuel D'instructions page 5


Protect the product from external damage, heavy dirt, moisture and excessive heat!

In order that the warranty claim does not expire please use only the supplied items. Repairs may only be
done by an expert and only by using original spare parts!

In commercial institutions, the accident prevention regulations of the professional trade association for
electrical equipment and facilities must be adhered to.
Instruction for installation (Fig 1):
Danger:
Before installing make sure that the circuit is interrupted! For installation, the work on the mains voltage is
required. Remove the associated mains fuse or deactivate the switch fuse! Check by using a voltage tester if the
line is de-energized. Make sure that the current circuit will not closed during the installation! There is danger to life
here!
Danger:
The installation of this product may be done only by a qualified person according the valid regulations for
electrical installation!
Attention:
Before drilling the mounting holes, make sure that there are no gas, electricity or water pipes at the
drilling location that could be damaged by this!

This product is only suited for indoor-use and not for outdoor-use!

Plan a minimum distance of 50cm between the illuminated area and the lamp.

Observe the safety instructions and technical data before installing this product!

Note on installation:
L: Live wire (black)
N: Neutral conductor (blue or grey)
Technical Data:
Operating voltage:
Nominal wattage:
Nominal luminous flux:
Rated color temperature:
Electrical protection:
Protection class:
This product contains a light source of energy efficiency class F.
Disposal note:
This product may not be disposed of with household waste. At the end of its useful life, the product must be
returned to a point of acceptance for the recycling of electric and electronic device. Please ask your local
municipality for the point of acceptance! As the devices contain valuable recyclable materials, they should be sent
for recycling, in order not to harm the environment or human health from uncontrolled waste disposal.
Cleaning:
Danger:
Before start cleaning the product interrupt the current circuit by switching off the circuit breaker or unscrew
the fuse! Use a slightly moistened cloth for cleaning. In order not to damage the product, it is essential to avoid water
penetrating into the housing! Never clean the device under running water! Do not use solvent-containing cleaner for
cleaning.
SEBSON
Sebastian Sonntag
220-240V AC 50/60Hz
15W
1.300lm
4000K
IP 44
II
5