Publicité
Les langues disponibles
Les langues disponibles
Liens rapides
H-10195, H-10196
H-10197
MODULAR DRAWER
WORKBENCHES
TOOLS NEEDED
Drill
Phillips Head Drill Bit
Cabinet x 1
Channel
(left-hand) x 1
1.
Flip leg upside down. Place
leveling feet into threaded
holes on bottom of leg and
twist clockwise to attach.
(See Figure 1)
NOTE: Workbench can
have leg assembled to
the right or left-hand side
of the cabinet. Cabinet
has threaded holes on
each side for support
dowels.
PAGE 1 OF 6
1-800-295-5510
uline.com
or
10 mm Drill Bit Socket
Attachment
PARTS
Support Bracket x 2
Leg x 1
Support Dowel x 2
(right-hand) x 1
ASSEMBLY
Figure 1
Channel
2. Choose desired cabinet side. Support dowel has a
male and female threaded end. Insert male end
of dowel into threaded holes of cabinet and turn
clockwise until fully tightened. (See Figure 2)
Figure 2
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.
Tabletop x 1
Hardware Kit
Leveling Foot x 2
M6 x 20 mm
Bolt x 16
ST6.3 x 25 mm
Allen Wrench x 1
Wood Screw x 12
0123 IH-10195
Publicité
Manuels Connexes pour Uline H-10195
Sommaire des Matières pour Uline H-10195
- Page 1 Para Español, vea páginas 3-4. Pour le français, consulter les pages 5-6. H-10195, H-10196 1-800-295-5510 H-10197 uline.com MODULAR DRAWER WORKBENCHES TOOLS NEEDED Drill Phillips Head Drill Bit 10 mm Drill Bit Socket Attachment PARTS Tabletop x 1 Support Bracket x 2...
- Page 2 Figure 4 Carefully recheck all screws for tightness. NOTE: Cabinet and channels have threaded holes for M6 x 20 mm bolts. NOTE: Channels must be attached to leg first for proper assembly. 1-800-295-5510 uline.com PAGE 2 OF 6 0123 IH-10195...
- Page 3 H-10195, H-10196 800-295-5510 H-10197 uline.mx MESAS DE TRABAJO MODULARES CON CAJONES HERRAMIENTAS NECESARIAS Taladro Broca de Cruz Aditamento de Dado de Broca de 10 mm PARTES 1 Cubierta 2 Brazos de Soporte Kit de Tornillería 1 Gabinete 1 Pata 2 Taquetes de Soporte...
- Page 4 Vuelva a verificar que todos los pernos estén apretados. NOTA: El gabinete y los canales cuentan con orificios roscados para pernos M6 x 20 mm. NOTA: Primero se deben fijar los canales a la pata para un ensamble adecuado. 800-295-5510 uline.mx PAGE 4 OF 6 0123 IH-10195...
- Page 5 H-10195, H-10196 1-800-295-5510 H-10197 uline.ca ÉTABLIS MODULAIRES À TIROIRS OUTILS REQUIS Perceuse Mèche de perceuse Mèche de perceuse cruciforme de 10 mm PIÈCES Surface de table x 1 Support de fixation x 2 Matériel de fixation Armoire x 1 Pied x 1...
- Page 6 Vérifiez soigneusement que toutes les vis sont bien serrées. REMARQUE : L'armoire et les profilés comprennent des trous filetés pour les boulons M6 x 20 mm. REMARQUE : Pour obtenir un montage adéquat, les profilés doivent être d'abord fixés au pied. 1-800-295-5510 uline.ca PAGE 6 OF 6 0123 IH-10195...