Télécharger Imprimer la page

Woods 076-2936-2 Manuel Du Propriétaire page 3

Publicité

Les langues disponibles

Les langues disponibles

Step 6: Attach fly
1) Unfold the fly and place over the tent.
2) Attach hook and loop tabs on the
underside of the fly to poles (A).
3) Attach fly to tent by attaching the plastic
buckle on fly ends to corresponding buckle
locateed at the stake loops. Buckles can be
adjusted to make fly taut.
Step 9: SUV Sleeve
1) Unzip rear panel, roll and toggle into place above the sleeve.
2) With SUV in place, position the SUV sleeve over the roof.
3) At the bottom center of the sleeve locate green webbing with hook and ring.
Fasten around vehicle bumper.
4) Elasticized edge should be over the vechicle roof and around the rear wheel well.
Secure sleeve to SUV using lines at either side of the sleeve top to vehicle (roof rack, door
handles).
5) Tighten edge of sleeve around SUV using four green webbing / ladder lock buckles.
5
CAUTION: Avoid hot muffler. Do Not operate vehicle with sleeve in place.
All manuals and user guides at all-guides.com
Step 7: Front Porch
1) Zip the front panel shut.
2) Insert the fly pole (B, grey) through the sleeve found over the front panel.
3) Place pole ends into the fast feet at the corners of the front porch.
4) Position and secure the perameter of the porch using stakes.
5
Step 10: Disassembly
1) To take down the tent, disassemble in
reverse order.
2) Remove accessories (if included).
3) Remove and fold fly.
4) Be sure to leave doors and windows
unzipped to avoid zipper damage.
5) Remove stakes with hammer or stake
puller. DO NOT pull on tent.
6) Carefully disengage poles from fast feet.
Carefully push pole away from you through
the hanger to minimize risk of damage to
tent or poles.
7) Keep stakes in bags provided.
Step 8: Secure guy lines
1) Secure tent using all guy lines and stakes.
Tent must be secured for proper function.
Step 11: Packing the tent
1) Spread tent flat, distribute evenly.
2) Fold into quarters not to exceed the length
of pole bag.
Dimension A should
Fold tent into a
be close to but not
A
rectangular shape.
exceed the length
of the pole bag.
3) Lay pole bag at opposite end from door.
Tightly roll bag, skin and fly forcing air
through unzipped door.
Front of tent
(door unzipped)
4) Secure with ties and place in carry bag with
stakes and accessories.
5) Tent must be clean and dry before storage.
Store off concrete floor.
Be certain campfires are extinguished.
Dispose of trash appropriately.
CTC180909-1 06/17

Publicité

loading

Ce manuel est également adapté pour:

Ctc180909-1