Urban Barn Lottie Dove Instructions D'assemblage

Masquer les pouces

page de 5

/ 5
Signets

Liens rapides

Télécharger ce manuel

Brandt Bed

Lit Brandt

Assembly Instructions / Instructions d'assemblage

Please follow instructions closely as deviation from these instructions may present a

possible safety risk and may void your warranty.

It is recommended that assembly is done on a soft surface such as carpet to avoid any

damage during assembly.

Veuillez suivre attentivement ces instructions. Le non-respect de ces instructions pourrait

poser un risque pour la sécurité et invalider votre garantie.

Il est recommandé d'assembler le produit sur une surface souple comme un tapis pour

éviter d'endommager le produit pendant l'assemblage.

Care Instructions / Directives d'entretien

Periodically check and re-tighten hardware.

Vérifier périodiquement et resserrer la quincaillerie au besoin.

Part / Pièce A X 24

Part / Pièce

φ5/16 X 30mm

φ13 mm

Part / Pièce

H X 4

Part / Pièce

Φ5/16 X15mm

Part / Pièce

M X 1

B X 28

C X 28

Part / Pièce

φ18mm

I X 4

Part / Pièce

J X 3

Part / Pièce

D X 1

Part / Pièce

M5 X 100mm

φ4 X 30mm

Part / Pièce

K X 1

Part / Pièce

N X 1

E X 48

Part / Pièce

F X 4

8mm X 98mm X 30

Part / Pièce

0 X 1

Part / Pièce

G X 1

98mm

L X 2

Sommaire des Matières pour Urban Barn Lottie Dove

Page 1 Brandt Bed Lit Brandt Assembly Instructions / Instructions d’assemblage Please follow instructions closely as deviation from these instructions may present a possible safety risk and may void your warranty. It is recommended that assembly is done on a soft surface such as carpet to avoid any damage during assembly.
Page 2 Assembly / Assemblage Step 1. • Insert bolt (A), lock washer (B), and flat washer (C), into the holes in the headboard (K) and footboard (M) as shown in the image below. Leave at least ¼” gap between the head of the bolt and washers and the headboard (K) and footboard (M).
Page 3 Step 2. • With help, carefully ﬂip the bed frame over on its side onto a clean smooth surface such as carpet or cardboard. • Align the corner brace (F) with the four inside corners of the bed. Insert bolt (A), lock washer (B), and flat washer (C), into the holes in the headboard (K) and footboard (M) as shown in the image below.
Page 4 Step 3. Insert wood legs (I) into the corner brace (F). Align flat washer (C), lock washer (B), and nut (H). Tighten with supplied wrench (G). With help, carefully lay the bed down onto the legs. DO NOT DROP THE BED. This can damage the frame. Étape 3.
Page 5 Step 5. Unroll the slat roll (O) onto the ﬂoor. Make sure the fabric straps are facing upward. With help, lay them into the bed frame. Make sure the last slat “locks” over the slat blocks on the center rail (N) and the siderail (L) as shown below.

Urban Barn Lottie Dove Instructions D'assemblage

Liens rapides

Manuels Connexes pour Urban Barn Lottie Dove

Sommaire des Matières pour Urban Barn Lottie Dove