Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
1.
Plug the mouse connector into the mouse-only USB
port
located at the back of your laptop (Image A).
The red LED located under the device will light up to
indicate that your mouse is ready for use.
2. Your mouse comes with a retractable cable to
organize unsightly cord and self adjust the cable
length. Gently pull on the cable to adjust the cable to
the desired length. To retract the cable, pull it again
slightly, then release it.
Note :
The mouse does not work.
• Make sure that the mouse connector is firmly plugged
into the mouse-only USB port at the back of the laptop.
• Unplug the mouse then plug it back.
The screen cursor does not move properly or does
not move at all.
You may be using the mouse on an incompatible surface.
Make sure you are not using your mouse on a transparent
surface like glass or a reflective surface like a mirror. Try
using a traditional mouse pad or use the mouse on a
different surface.
IMPORTANT: THIS PRODUCT IS NOT A TOY
Mouse voltage: 5V
CLASS 1
LASER PRODUCT
6
, 100mA
Copyright © Lexibook 008
Publicité
