Eaton xComfort CBEU-02/01 Instructions De Montage page 3

1,5 mm 2
10 mm
Declaration of Conformity
We, EATON Industries (Austria) GmbH
3943 Schrems, Eugenia 1
Austria
declare that product (family)
Eaton - Binary input with 230VAC power supply,
CBEU-02/01
(the declaration of conformity applies to all
listed types within our actual product catalog)
provided that it is installed, maintained and used in the
application intended for, with respect to the relevant manufacturers
instructions, installation standards and "good engineering practices"
complies with the provisions of Council directive(s):
Low Voltage Directive 2006/95/EC
EMC Directive 2004/108/EC
Radio and Telecommunications Terminal Equipment 99/05/EC
RoHS Directive 2011/65/EU
based on compliance with European standard(s):
EN301489-3 V1.6.1, EN300220-2 V2.4.1, EN50491-5-1/10, EN50491-5-
2/10, EN62479/10, EN50428/05 + A1/07 + A2/09
tested by:
TÜV Austria Services GmbH, Notified Body
1230 Vienna, Deutschstrasse 10, Austria
Affixing date of CE mark: 2003
Doc.Id.: CBEU-02/01
01.12.2014
Heinz Ursprunger Friedrich Schröder
Director Product Line Director Quality
& Marketing Management
3
& EHS