LEGION LIGHTING WV8121 Serie Manuel D'installation

INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS
!
SAVE THESE INSTRUCTIONS
SAFETY PRECAUTIONS:
1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A
PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS
INVOLVED.
3. CONNECT THE GROUND WIRES (BARE COPPER OR GREEN) FROM YOUR FIXTURE TO THE GROUND
WIRE (BARE COPPER OR GREEN) OR GROUND SCREW IN THE ELECTRICAL BOX.
4. TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH A
CLEAN, SOFT CLOTH.
NOTE: Product may not look exactly as shown in figures.
INSTALLATION:
Step 1
Mounting
Bracket
Step 2
Screw
Step 3
Legion Lighting Co., Inc. | 155 Marcus Blvd., Hauppauge, NY 11788 | Phone: 718-498-1770 | Toll Free: 1-800-4-LEGION | email: sales@legionlighting.com |
READ ALL INSTRUCTIONS
IMPORTANT SAFETY
INSTRUCTIONS
Screw
Fixture
Metal
Plate
Glass
1
2
TOOLS AND MATERIALS REQUIRED:
Remove the mounting bracket from the fixture
by unscrewing the 2 screws.
Remove the two metal plate on both ends of
the fixture by loosening the screws.
Fixture
Insert the glass as shown. Reinstall the two metal plates
onto the fixture.
Fixture
1-2
Series WV8121
Wire Cutters
Phillips
Screwdriver
Wrench
Pliers
Wiring supplies
as required by
local electrical
code
www.legionlighting.com