FlyTek ZIP Manuel D'exploitation Et D'entretien page 16

Any type of cleaning, except for the one of the pouring groups, must be executed with machine turned
off (general power switch on zero) and after the machine has cooled. To clean the external surfaces of the
machine only use a soft wet cloth. The drip tray (ref. A) must be removed and washed with hot water and
soap using a nonabrasive sponge and must be properly dried before reinserting it. If the cleaning of the
tank is necessary, use warm water.
Repairs must be executed exclusively by authorised and qualified personnel. If you are not able to solve
the problems with the help of the present table, contact your Authorised Retailer.
CLEANING OF THE MACHINE
Do not use the dishwasher to clean the machine or its components. They
would be irremediably damaged! Also, do not use solvents and abrasive
products or materials.
If using detergents for the cleaning of the tank, make sure to scrupulously
rinse it, since possible chemical residues inside the tank may cause risk of food
poisoning.
ANOMALIES AND POSSIBLE SOLUTIONS
Any repairs executed without observing the production specifications of the
Manufacturer and/or using unoriginal spare parts, may represent a hazard for
the user.
If the water in the tank finishes the pump may burn and, consequently, the
machine may be subject to short-circuit.
16