Riiot blue Guide De Démarrage Rapide page 4

All manuals and user guides at all-guides.com
Thanks for choosing Blue by Riiot.
For more information consult the online user manual and view our
videos on our website www.blueconnect.io (help).
Introduction
A. Overview
Blue by Riiot continuously measures the key parameters of your
swimming pool (temperature, pH, ORP/Redox, conductivity). It also
informs you of the external temperature and weather based on your
geolocation. The results of this analysis are then communicated to you
via notifications on the "Blue Connect" app (available on smartphone
and tablet, compatible with Android™ and iOS). If the device detects
that one of the parameters is incorrect, an alert informs you of this
status and provides you with the instructions to follow to regulate and
stabilize this parameter in order to maintain a healthy and balanced
water.
Blue by Riiot measures the following:
» Water temperature (°C, °F): An elevated temperature reduces
the efficiency of the disinfectant product and promotes the
development of microorganisms.
» pH (hydrogen potential): this value measures the acidic or basic
character of a medium. pH contributes to the effectiveness of the
disinfectant.
» ORP/REDOX (measurement of active chlorine in mV): The ORP
measure is reflected in milli-volts (mV). The measurement taken
by the ORP probe of your Blue by Riiot is a voltage in milli-volts
(mV), which represents the more or less oxidizing nature of your
pool's water.
» Conductivity
1
salts in the water by the ability of the latter to conduct electricity.
For salt pools, salinity (more precisely the total salt content) is measured on
1
the conductivity basis. The salinity measured by the Blue by Riiot is expressed
in grams per liter (g/L) of TDS (Total Dissolved Solids). This is an estimate of [...]
(μS): Measurement of the concentration of inorganic
Q U I C K S TA R T G U I D E
1