Publicité
Les langues disponibles
Les langues disponibles
10.3 STEP CUTTING____________________________________________________________
NOTE: Arrow indicates direction of travel.
Probable Cause
HOC (height-of-cut) settings are different from one side of a
deck to the other or from one deck to another.
Worn deck caster wheel bearings or fork bushings.
Tire pressure uneven.
All manuals and user guides at all-guides.com
Step cutting occurs when grass is cut taller on one side of
a deck than the other. This is usually caused by
mechanical wear or deck caster adjustment.
TN0221
Check HOC adjustment of decks. (Refer to Section 8.11.)
Check/replace deck caster wheel bearings and fork bushings.
Check/adjust proper tire inflation pressure. (Refer to Section 7.17.)
QUALITY OF CUT
Remedy
10
en-57
Publicité
