Salora HDD-2510 Mode D'emploi page 142

Operation
1. Enter the Disc Operation control menu, and use the Up/Down buttons to select Lock Disc. Then press
Enter to confirm. In order to see if a disc is write-protected, use the Browse Disc Information function. A
write-protected disc cannot be recorded, formatted or edited unless the write protection is cancelled.
Renaming a Disc:
Enter the Disc Operation menu, and use the Up/Down button to select "Rename Disc". Then press Enter to
confirm. A dialog box with a keyboard layout appears. Use the Arrow buttons and the Enter button to enter
any letters you wish.
Space: add a blank, Caps: capital letters, BkSP: delete previous character, Delete: delete next character,
Clear: delete all characters, Exit: exit, OK: confirm input.
Recording a new title:
Use the Up/Down buttons to select "Record a New Title", press the Enter button to confirm and the system
will change into TV mode. Press the Source button to switch the input sources. Press the Rec/OTR button
and you can enter a new title. Other operations are similar to manual recording.
Overwriting a Disc:
Use the Up/Down buttons to select the "Overwrite Entire Disc", press Enter to confirm, and the system will
change into TV mode. Press the Source button to switch the input sources. Press the Rec/OTR button and
you can start a new recording and overwrite all disc information. Other operations are similar to manual
recording
Finalizing the Disc:
This function is only available for DVD+R discs.
Enter the Disc Operation control menu, and use the Up/Down buttons to select "Finalize Disc". Then press
Enter to confirm. A dialog box appears. Select "Yes" to start the compatibility process.
You can also press Finalize to start the compatibility process directly.
This function allows recorded DVD+R discs to be played on other DVD players. However, it is impossible
to add new contents to such discs.
Do not switch off the power during the finalizing process to avoid any damage to the disc.
This function allows DVD+RW disc to be played on other DVD players. Once the disc is finalized, no
further writing or changes are allowed. (This applies only to DVD+R discs)
Menu Exit
Press the Disc Op button to leave this mode.
All manuals and user guides at all-guides.com
27