Waves IVC-107001 Mode D'emploi page 8

9. Only have the appliance repaired by a qualified
service centre.
10. Qualified service center: after-sales service of the
manufacturer/importer, which is qualified to carry
out repair to avoid any kind of danger. In case of
problems please return the appliance to this service.
Electricity and heat
1. Before use, check that the mains power supply
voltage is the same and the voltage is the same as
the voltage indicated on the appliance.
2. Always plug the appliance into an earthed plug
socket.
3. Regularly check the power cord for damage.
4. If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
5. Do not operate any appliance with a damaged cord
or plug or after the appliance malfunctions, or is
dropped or damaged in any manner. Return
appliance to manufacturer or the nearest authorized
service agent for examination, repair or electrical or
mechanical adjustment.
6. To remove the plug from the plug socket, pull the
plug. Do not pull the power cord.
7. Make sure the power cord does not come into
contact with hot surfaces or steam.
All manuals and user guides at all-guides.com