Uline H-1546 Guide Rapide

H-1546
ROLLING CLOTHES
RACK
TO ASSEMBLE RACK
1. Place rack base on ground and fold up arms.
2. Pull arms outward until uprights are stretched into
complete vertical position; then, insert hang bar
into arms. (See Figure 1)
3. To increase height, pull up extensions if needed.
NOTE: Hang bar can be lengthened by pulling
out ends of hang bar.
Figure 1
PAGE 1 OF 3
1-800-295-5510
uline.com
Rack Hang Bar x 1
Rack Base x 1
INSTRUCTIONS
Extensions
PARTS
FOR EASY TRANSPORTATION AND STORAGE
NOTE: To attach clamps, first remove screws
from base.
1. Remove hang bar, push in extensions if applicable,
and fold down arms.
2. Attach clamps using locking washers and screws.
(See Figure 2)
3. Snap hang bar into clamps.
Figure 2
Para Español, vea página 2.
Pour le français, consulter la page 3.
Locking Washer x 2
Clamp x 2
Red Hardware Bag
0523 IH-1546