ECS ELITEGROUP Z170IU-C43 Mode D'emploi page 8

I/O Ports
1. Audio Ports
Use the audio jacks to connect audio devices. The D port is for stereo line-in signal,
while the F port is for microphone in signal. This motherboard supports 8-channel
audio devices that correspond to the A, B, C, and E port respectively. In addition, all
of the 3 ports, B, C, and E provide users with both right & left channels individually.
Users please refer to the following note for specific port function definition.
The above port definition can be changed to audio input or audio output by
changing the driver utility setting.
2. USB 3.1 Ports
Use the USB 3.1 ports to connect USB 3.1 devices.
3. USB 2.0 Ports
Use the USB 2.0 ports to connect USB 2.0 devices.
4. LAN Port
Connect an RJ-45 jack to the LAN port to connect your computer to the Network.
LAN LED
Activity LED
Link LED
5. USB 3.0 Ports
Use the USB 3.0 ports to connect USB 3.0 devices.
6. DVI Port
Connect your monitor to the DVI port.
7. DP Port
Connect your monitor to the DP port.
8. HDMI Port
You can connect the display device to the HDMI port.
6
All manuals and user guides at all-guides.com
A: Center & Woofer D: Line-in
B: Back Surround E: Front Out
C: Side Surround F: Mic_in Rear
Status Description
OFF No data
Orange blinking Active
OFF No link
Green Link
Z170IU-C43 USER MANUAL
Link LED
LAN Port