HOMCOM B72-032 Instructions D'assemblage page 8

INSTALL THE TOOL TRAY:
1.Lift the Support Spreader and the Bracket
3. Make the support spreader insert into the bracket, let the holes of the spreader and
the bracket are aligned.
4. Loosen the Ring-Pull, and make sure the iron pin insert into the holes to fix it.
FIX THE TOOL TRAY ON THE LADDER:
1. Open the screw, make the step tube insert into the bayonet of the bracket.
2. Lift the screw up and close it, clockwise the plastic nut until it has no
clearance, make sure it has been fixed firmly.
2. Pull the Ring-Pulls, Retract Iron Pin
-8-