Traxon Allegro Dot XS Instructions De Montage page 2

4.00mm
0.16"
5.00mm
0.20"
18.80mm
0.74"
AL DOT XS MESH GRID MOUNTING
BRACKET SET (85 sets) (AM461780055)
NOTE: Please refer to the installation guide for Mesh Grid installation planning.
Mounting-WIRE MOUNTING
12.00mm/0.47"
9.00mm
0.35"
16.20mm
0.64"
AL DOT XS WIRE MOUNTING BRACKET SET
(85 sets) (AM461790055)
www.traxon-ecue.com
Mounting Guide
17.00mm/0.67"
8.00mm
0.31"
21.91mm
0.86"
Please make sure the wires fit into the slot
between back and front bracket.
17.00mm
0.67"
1
21.90mm
0.86"
Allegro Dot XS
Mounting Guide
1
1
1
3
2
4
Please make sure the 4 locks are snapped
tightly when installing.
1 φ1.5mm (1/16") φ1.5mm (1/16")
stainless steel wires stainless steel wires
(By others) (By others)
Tighten the screw with Tighten the screw with
torque ≥0.22Nm. torque ≥0.22Nm.
08/23 V1.1
2
Horizontal cable run Vertical cable run
2
©2023 TRAXON TECHNOLOGIES. ALL RIGHTS RESERVED.
2
2
2 of 4