Maintenance Instruction - COFAN 0900 0401 Guide D'utilisation

6. Explanations Of Warning Signs Used For This Tool.
The operator's Hearing protection
Instruction must be Must be worn.
read before work
starts.
7. Application.
Power tool, which delivers a series of percussive blows, without rotary action.
8. The weight of this tool is about : 1.5 ~8.5 Kgs.
Note: If the weight of this tool exceeds 15Kgs,the following attention shall be paid to :
(1) Be sure that you can afford the weight.
(2) Be sure to wear foot protection, to prevent the risk of impact due to the drop of tool.

3. Maintenance Instruction

1. Lubrication.
Proper lubrication is the owner's responsibility. Failure to lubricate the air tool properly will dramati-
cally shorten the life of the tool and will void the warranty.
This hammer requires lubrication before the initial use and before and after each
additional use.
2. Hammer requires lubrication throughout the life of the tool and must be lubricated in two separate
areas : the air motor and the impacting mechanism. Follow the outlined procedures.
3. Air Motor Lubrication.
The motor must be lubricated daily. An air motor cannot be oiled too often.
Disconnect the hammer from the air supply before lubricating for inlet oiler.
Eye protection Engine oil
must be used or
safety glasses
worn.
ENGLISH
16
Fuel