Publicité
Les langues disponibles
Les langues disponibles
6
All manuals and user guides at all-guides.com
2. USING THE PRODUCT
2.1. Car Installation
Slide the speaker into the plastic holder and stick it on the top left of
the windscreen as
shown below. make
sure the speaker is
firmly attached with
the
microphone
pointing
towards
the driver.
2.2. Charging
Prior to using the speaker the first time, it is recommended to fully charge
the battery. Normal full charge time is approximately 2 hours. The red LED
will stay on while charging and will be off as soon as it is completed.
For an efficient solar charge, direct the speaker solar panel on the back
towards the sun as recommended above. 2 hours of sun light exposure
will give approximately 1 hour of talk time. Using solar power charge,
operation time will be extended continuously without any additional
charge required by the car charger.
2.3. Power On / Power Off
Power On: press and hold the mFB button for 3 seconds until you hear
a short beep. The flashing blue LED light indicator comes on, and the
speakerphone automatically connects to the mobile phone it has been
paired with already.
Power Off: press and hold the mFB button for 3 seconds until you hear a
short beep. The flashing red LED light indication goes off.
2.4. Pair and connect
Refer to the Bluetooth pairing procedures in the mobile phone user
manual.
When the speaker is off, long press the mFB button for about 5 seconds
until the light indicator flashes red and blue alternatively, then release
the button. The alternated flashes indicate that the speaker is in pairing
mode.
ENGLISH
Publicité
