Drive DeVilbiss Healthcare BEN 2G Mode D'emploi page 9

• Every serious incident which occurs in connection with
the product must be reported to the manufacturer and
the competent authority of the member state in which
the user and/or patient is located.
Securing in the bathtub
Swiveling the seat
Use
• Hold onto the armrests securely with both hands and
sit on the seat.
• Now pull the locking lever (2) upwards, raise your legs
and swivel them into the tub (pic. 2).
• The released locking lever automatically clicks into
all 90° positions. Do not press the locking lever
downwards!
• To get out of the tub, follow the steps in reverse order.
Drive Medical GmbH & Co. KG | As per: 18.08.2023 | Errors and alterations excepted
Rotate both set screws
(1) until they touch the
edge of the tub and pre-
vent the seat from slip-
ping (pic. 1).
The seat can be swiv-
eled after pulling the
locking lever (2) (pic. 2).
This function should be
checked prior to initial
use.
Cleaning | Maintenance
• Clean regularly with a moist cloth!
• Do not use any aggressive cleaning agents!
• Do not use abrasive cleaners!
• Do not use any high-dose chlorine and vinegar-based
cleaners!
• To disinfect, a spray disinfectant can be used such as
Descosept AF or Bacillol AF.
• Check the screws regularly and tighten, if necessary.
• The product should not be exposed to temperatures
above 60 °C for long periods of time (for example, use
in a sauna, etc.).
• In the event of defects, contact your specialist dealer
from whom you purchased this product.
Technical data
Article number
Max. load
Seat width x seat depth
Overall width
Overall depth
Height of backrest
Seat adjustment
Color
Adjustment (width of bath-
tub) min.
Adjustment (width of bath-
tub) max.
Total weight
Frame material
Seat material
EN
550600300
130 kg
44 x 44 cm
71 cm
52,8 cm
37 cm
4 x 90°
white
48,5 cm
64,5 cm
3,47 kg
Aluminium
Plastic (PE-HD)
9
Instructions for use BEN 2G