Marantz CD-17mkIII Mode D'emploi page 8

REMOTE CONTROL UNIT RC-DA17CD
When the power to the CD player is ON and a disc is loaded on the disc
tray, the remote control unit (RC-DA17CD) can be used to operate the
player's various functions. However, the power to the CD player must be
switched ON/OFF using the POWER switch on the main unit.
CD 1
DIMMER TIME
REPEAT A - B
CANCEL EDIT
1 2
4 5
7 8
0
OPEN/CLOSE
RECALL
CD TEXT SCROLL
TEXT
TEXT
RC-DA17CD
v v v v v
OPEN/CLOSE button
n n n n n
PLAY button
m m m m m
STOP button
, , , , ,
button
PAUSE
These buttons have the same functions as the buttons with the same
names on the main unit front panel. See the corresponding descriptions
on page 4.
. . . . .
, buttons
When the button is pressed during playback, play re-starts at the
beginning of the current or a previous track.
When the button is pressed, play re-starts at the beginning of the
next or a subsequent track.
The selected track number is shown on the display.
These buttons can also be used to select a desired track from which to
start playback.
These buttons are also used in program mode to select tracks for
programming.
* The and (Track Previous/Next) buttons on the remote
control do not start a search.
Use the and (Search Reverse/Forward) buttons to conduct
a search.
⁄ 1 ⁄ 1 ⁄ 1 ⁄ 1 ⁄ 1
CD button
With the CD-17mkIII, this button is invalid.
⁄ 2 ⁄ 2 ⁄ 2 ⁄ 2 ⁄ 2 ⁄ 3 ⁄ 3 ⁄ 3 ⁄ 3 ⁄ 3
, DIGITAL 1, 2 button
With the CD-17mkIII, this button is invalid.
⁄ 4 ⁄ 4 ⁄ 4 ⁄ 4 ⁄ 4
DIMMER button
Press to adjust the display illumination brightness. The illumination at its
the brightnest when the power is switched ON. Each time this button is
pressed, the brightness dim until the fourth press, after which the
illumination returns to the original brightness.
Invalid with the
CD-17mkIII
DIGITAL 2
VOLUME
PROG
3
6
9
RANDOM
AMS
HIGHLIGHT S.
⁄ 5 ⁄ 5 ⁄ 5 ⁄ 5 ⁄ 5
TIME button
Switches the time shown on the display to the remaining time of the
current track or the remaining time of the entire disc.
With a CD-TEXT disc, this switch is also used to switch the displayed
information from the text display mode to the time display mode.
⁄ 6 ⁄ 6 ⁄ 6 ⁄ 6 ⁄ 6
REPEAT button
Press to select 1-track repeat, all-track repeat or program repeat
playback mode.
⁄ 7 ⁄ 7 ⁄ 7 ⁄ 7 ⁄ 7
A-B button
Used to set the starting and stopping points of a passage for repeated
playback.
⁄ 8 ⁄ 8 ⁄ 8 ⁄ 8 ⁄ 8
CANCEL button
Used to delete specified track numbers from a program.
Also used when creating programs by deleting any tracks which you do
not want to listen to (delete programming).
⁄ 9 ⁄ 9 ⁄ 9 ⁄ 9 ⁄ 9
EDIT button
Press to engage the editing function, which helps record a disc onto a
tape by playing the tracks according to the tape length and leaving a
non-recorded blank of 4 seconds between every track.
¤0 ¤0 ¤0 ¤0 ¤0
VOLUME buttons
Press to vary the ANALOG OUTPUT volume between 0 and –30 dB. The
level when the power is turned on is 0 dB (maximum volume).
¤ 1 ¤ 1 ¤ 1 ¤ 1 ¤ 1
PROG button
Press to activate program play, so that only the selected tracks from the
disc loaded on the disc tray will be played.
¤ 2 ¤ 2 ¤ 2 ¤ 2 ¤ 2
Numeric (0 to 9) buttons
When used during playback, these buttons allow you to specify the
number of another track you want to play.
When used during stop mode, these buttons allow you to specify the
number of a track from which to start playback.
These buttons are also used to select tracks for programming.
¤ 3 ¤ 3 ¤ 3 ¤ 3 ¤ 3
INDEX buttons
: Press during playback to return to the next index.
: Press during playback to advance to the next index.
* These buttons are valid when playing a disc in which index have been
recorded.
¤ 4 ¤ 4 ¤ 4 ¤ 4 ¤ 4
, (Search Reverse/Forward) buttons
: When pressed during playback, this button fast-reverses the
play position.
: When pressed during playback, this button fast-forwards the
play position.
¤ 5 ¤ 5 ¤ 5 ¤ 5 ¤ 5
RANDOM button
When this button is pressed, the player enters random play mode (tracks
on the disc are selected and played in a random order). When pressed
again, random play is cancelled.
¤ 6 ¤ 6 ¤ 6 ¤ 6 ¤ 6
AMS (Automatic Music Scan)/HIGHLIGHT S.(Highlight
Scan) button
When this button is pressed, the player automatically plays the first 10-
second part of each track in the disc.
If the loaded disc is a CD-TEXT disc containing the highlight information,
the first press of the button initiates the Highlight Scan operation and the
second press initiates the normal AMS operation as described above.
¤ 7 ¤ 7 ¤ 7 ¤ 7 ¤ 7
RECALL/SCROLL button
Press this button to display the programmed track numbers and program
numbers (the order the tracks are programmed) in sequence.
If the loaded disc is a CD-TEXT disc, press this button while the text
information is displayed to scroll the characters.
¤ 8 ¤ 8 ¤ 8 ¤ 8 ¤ 8
CD-TEXT button
When playing a CD-TEXT disc, press this button to switch the time
display to the text information display.
* If this button is pressed when the loaded disc is not a CD-TEXT
compatible disc, the display shows "No Text" then returns to the time
display.
6