Easy GAME TIMER Manuel D'utilisation page 6

Masquer les pouces

page de 34

/ 34
Signets

Les langues disponibles

Setting of the time measuring modes and

time-controls.

After the easy gametimer has been activated, you will

notice the time-control and settings used during the

last game. The time available to both players are

surrounded by a blinking area. By pressing on the

Start/Stop button

, you could start the game, but

you may also first change the settings.

You now could:

Change the time available to both players

simultaneously

Press on the

desired time appears in both displays. When you

keep pressing the

time will change at an increased speed. The

maximum time-limit is 9 hours and 59 minutes.

Please note: When time-control exceeds 20

minutes, you will see hours and minutes in the

display. When there are less than 20 minutes left,

you will see seconds as well.

Change time available to only one of the

players

Move with the

and/or the

display until the area of only the player whose

time-limit you wish to change is blinking. Press on

the

and/or the

appears in the display.

Change the time measuring mode

Move with the

and/or the

display until the area around the time measuring

modes is blinking. Press on the

button until the desired time measuring mode

appears in the display.

All manuals and user guides at all-guides.com

and/or the

button until the

and/or the

button, the

button through the

button until the desired time

button through the

and/or the

The time measuring modes of the easy

gametimer.

The easy gametimer gives you the option of timing

your game in various ways.

Move timer

Each player has a certain amount of time

available for each separate move. When a player

has completed his move, he gets the allotted time

available for his next move. When a player has

used up his time for a move, the flag will appear in

the display.

Game timer

Each player has a certain amount of reflection

time for the entire game; the player decides for

himself how he divides the time available for the

game. When a player has used up his time, the

flag will appear in the display. The clock will

continue in the 'count up' mode. There will appear

Game timer count-up option

If you set the reflection time for both players on

0:00, then both times will at once switch to the

'count up' mode. After the clock is started, the

time used by each player is recorded. There will

appear a

shown in the display.

Technical specifications

Batteries:

Penlight (AA, 1.5V), 2 pieces.

Alkaline type recommended.

Service life:

By using 2 alkaline batteries and

very regular use of your clock, you may count on a

service life of at least 2 years.

Accuracy:

Better than one second per hour.