Iridium FLOODER LED Manuel page 6

Dear customer,
thank you for deciding to purchase our product. The product fulfils the requirements of effective European and national
guidelines. To maintain the condition of the product and to ensure safe operation, you - as the user - must observe the
product notes and the operation manual!
They contain important information for the start-up and handling. It is important, therefore, that these documents are
archived carefully for referring to information at a later stage.
1. Safety Instructions
We are not responsible for any property damage or personal injury caused by failure to observe these product notes and
manual, improper handling or unauthorised modifications.
It can only be installed by a qualified electrician. Make sure that the item has not been damaged during transport before
putting the light into operation. It may not be operated if there are any damages to electrical parts. The luminaire may
only be operated completely with its protective cover. It may only be operated once removed from the packaging. The
type plate must not be removed.
The connection lines in the building must be disconnected before installation and secured against being switched back
on. For this, trip the corresponding fuse switch in the building installation.
Make sure the electrical specifications for the connection lines correspond with the specifications given on the nameplate
of this product. We recommend that you protect the product with a residual-current-operated protective device.
Follow all installation regulations applicable at your location. Make sure that the cables and plugs are not subject to
tension or torsional forces and do not bend the cables. Protect all cables and insulation against possible damages.
Output lines should be laid separately and spaced apart from other lines. The power supply cables and the lamp feeders
must not cross each other.
Do not allow the product to come into contact with extreme heat or naked flames. Use the supplied fastening material
only when it is suited for the installation background. The product must not be covered with objects (decorations)
or thermally insulating coverings /similar materials. Before disposal of the packaging material make sure that all
components are removed. Keep packaging material away from the reach of children and pets. The packaging contains
small parts that may be swallowed by children.
2. Proper Use
This product is only intended for lighting purposes and may only be operated on normal or non-flammable surfaces. The
use can be done in indoor/outdoor areas.
Make sure that the surface is suitable for permanently and reliably taking the weight of the light.
3. Care
Repairs may only be carried out by a qualified electrician. If the external flexible cable or cord of this luminaire is
damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order
to avoid a hazard.
Disconnect the entire product from the mains first and allow it to cool down before cleaning or maintaining.
Use a dry or slightly moistened cloth for cleaning. Never use any chemicals, flammable cleaning agents or abrasives.
These may cause damage to the surface coating and/or the insulators.