Samsung 3 Serie Mode D'emploi page 18

Adjusting the Custom Picture
Your set has several settings which allow you to control
picture quality.
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3.
(On page 15)
. Press the ▲ or ▼ button to select a particular item. Press the
ENtER button.
. Press the ◄ or ► button to decrease or increase the value of
a particular item. Press the ENtER
. Press the EXIt button to exit.
♦ Backlight: Adjusts the screen brightness by adjusting the
LCD backlight brightness. (0~10)
♦ Contrast: Adjusts the lightness and darkness between
objects and the background.
♦ Brightness: Adjusts the brightness of the whole screen.
♦ Sharpness: Adjusts the outline of objects to either
sharpen them or make them more dull.
♦ Colour: Adjusts the colours, making them lighter or
darker.
♦ tint: Adjusts the colour of objects, making them more red or
green for a more natural look.
The adjusted values are stored according to the selected Picture mode.
In PC mode, you can only make changes to "Backlight", "Contrast" and "Brightness". (26, 32, 37 inch)
In PC mode, you can only make changes to "Contrast" and "Brightness". (40 inch)
In TV, Ext., AV modes of the PAL system, you cannot use the "Tint" Function.
You can return to the factory defaults picture settings by selecting the "Reset".
(Refer to "Resetting the Picture Settings to the Factory Defaults" on
The energy consumed during use can be significantly reduced if the level of brightness of the picture
is reduced, and that this will reduce the overall running cost.
All manuals and user guides at all-guides.com
button.
English - 1
tV
Picture
Mode : Standard
Backlight
Contrast
Brightness
Sharpness
Colour
tint G 0
Picture Options
Reset : OK
Move Enter
▲
Backlight
▼
Move Adjust Return
page 17)


9

0
0
R 0


Return