JUNO J6SLC RGBW MW Instructions D'installation page 5

B. LED Connector:
1. Plug orange connector from the fixture into the mating LED connector inside
housing. (Figure 2)
Step 3: INSTALL UNIT(S) INTO RECESSED HOUSING(S)
3.1 Squeeze legs of each torsion spring together and seat them inside the torsion
brackets of the Housing. Release springs, and gently push module into housing until
flush with ceiling. (Figure 3)
3.2 Repeat this step for each additional unit.
Note: When creating speaker groups, ensure "SATELLITE" units are located within 30 ft. of the "MASTER"
unit.
Step 4: SET UP EACH INSTALLED FIXTURE FOR SMART LIGHTING CONNECTIVITY
4.1 Ensure each unit installed is connected properly. Then, connect power back to
fixtures by returning the circuit breaker to ON or by setting the appropriate fuse at the
fuse box.
4.2 When power is first returned to the fixture, the light output will be set to max
brightness at 3000K. (Figure 4)
4.3 Download the SmartThings app (made by Samsung Electronics Co., Ltd.) on your smart device.
Make sure your smart device has the most recent version of the app downloaded.
Note: A Samsung SmartThings account must be created within the app to continue with the smart fixture set-up process.
4.4 For each fixture installed, connect the fixture to the SmartThings app by selecting the "
top right corner of the interface and select "add device". Use one of the methods below to connect
the fixture. (Figure 6)
A. Scan a QR code
Use your smart device's camera to scan SmartThings QR code on side of
i.
device (Figure 5)
Note: Be sure to not scan the Installation Instructions QR code also present on device's trim.
B. Scan for nearby devices
Select "Juno Connect" device by pressing "add" on desired fixture to set up
i.
Note: Only one fixture can be set up at a time. If multiple fixtures need to be set up, the setup process will need to be repeated
INSTALLATION INSTRUCTIONS
One Lithonia Way · Conyers, GA 30012 · Phone 1-(800)705-7378
Visit us at www.acuitybrands.com/juno-recessed
© 2023 Acuity Brands Lighting, Inc
Juno Smart LED RGBW Speaker LED Trim Kit
.
Figure 2
Figure 3
Figure 4
" sign on the
Figure 5
912-00386-001 REV B
DATE 05/2023
5
PAGE |