Publicité
Les langues disponibles
Les langues disponibles
Handle*2
4
5
M6*16 Screws*12
Please read the cooler manual carefully and assemble according to following steps
1. Please make sure all parts are accounted for before beginning assembly.
2. Place main basin up-side down on clean soft surface
3. Attach the 4 legs (part 11) to basin using the 12 M6*16 Bolts (part 10).
4. Place the bottom tray (part 12) over each leg and then screw each caster(parts
13 &15) into the legs with an open end wrench.
5. Turn over entire assembly right side-up. Press caster brake lever to lock casters
in place
6. Attach left handle (part 4) to main basin using 6 each M6*16 bolts (part 5) tighten
with wrench. Repeat for right handle.
7. Attach bottle-cap catcher (part 9) to main basin by sliding it down over 2 bolts
(part 16).
8. Attach bottle opener (part7) to main basin using 2 each M6*16 bolts. tighten with
the M6 Allen wrench provided.
9. Attach 2 each lid handles (part 1) to cooler lid (part 2) with 2 each M5*35 bolts
(part 3)
10. Clean inside of cooler completely with soft dry towel. Place cooler lid (part2) on
top of main basin (part 8)
1
2
3
6
7
8
9
10
11
12
13
14
15
17
2
Lid Handle*2
Lid*1
M5*35 Screws*2
M6*1 6 Screws*2
Bottle Opener*1
Basin*1
16
M6*16 Bolts*2
Bottle-cap Catcher*1
M6*16 Bolts*12
Legs*4
Bottom Tray*1
Casters with Lock*2
M6 Allen Wrench*1
Casters without Lock*2
Open End Wrench*1
Publicité
