Philips AVENT SCF287 Mode D'emploi page 11

Question
Why is the sterilisation process
so short?
Why does the appliance start
to heat up immediately when I
plug it in?
SCF285/SCF284: Why can't I
restart the appliance.
SCF287/SCF286: Why doesn't
the ready light go out, when I
restart the appliance?
All manuals and user guides at all-guides.com
Answer
You may have poured too little water into the steriliser (see
chapter 'Using the appliance').
You have pressed the power-on button before you plugged in
the appliance. When you press the power-on button before
you put the plug in the wall socket, the steriliser starts
operating immediately when you plug it in.
The appliance does not work for 10 minutes after a sterilising
cycle, it needs to cool down first. Wait for 10 minutes, before
you switch on the appliance again.
The appliance does not work for 10 minutes after a sterilising
cycle, it needs to cool down first. Wait for 10 minutes, before
you switch on the appliance again.
EngliSh
11