Télécharger Imprimer la page

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Liens rapides

Quick Start Guide
Hook+
Switch Interface
www.ablenetinc.com
1-800-322-0956
Made for
iPhone 7 Plus
iPad Pro 12.9-inch (2nd generation)
iPhone 7
iPad Pro 12.9-inch (1st generation)
iPhone 6s Plus
iPad Pro 9.7-inch
iPhone 6s
iPad mini 4
iPad Pro 10.5-inch
iPad (5th generation)
Hook+ requires iOS 8 or later
About Hook+
Hook+ is a switch interface accessory designed for use with Switch
Control found in iOS 8 or later. Unlike some switch interfaces,
Hook+ does not send emulated keystrokes (e.g. Space, Enter, 1,
etc.) for switch clicks. Instead, Hook+ uses Apple's new Assistive
Switch Events for switch clicks.
Using Assistive Switch Events instead of emulated keystrokes for
iOS devices provides the following benefits:
› Switch Control can be auto configured based on the number of
switches attached to the iOS device
› An external keyboard can be used in conjunction with Hook+
without having switch clicks misregister when certain keyboard
keys are activated
› Switch interface accessories using Assistive Switch Events are
fully compatible with iOS Switch Control and apps that have
implemented the Apple iOS UIAccessibility protocol
Hook+ is compatible with iOS 8 or later and most apps that
implement the Apple iOS UIAccessibility protocol. iOS device must
have a Lightning Receptacle.
Product Overview
Switch Jack 1
Switch Jack 2
Micro USB
Charging Jack
Warranty & Contact
Information
AbleNet manufactured products include a two-year limited warranty.
This warranty is against defects in materials and manufacturing for
two-years from the date of purchase. Warranty in full text, along with
return/repair information is available at www.ablenetinc.com.
AbleNet, Inc. 2625 Patton Road, Roseville, MN 55113
1-800-322-0956 / www.ablenetinc.com
"Made for iPhone" and "Made for iPad" mean that an electronic
accessory has been designed to connect specifically to iPhone or
iPad, respectively, and has been certified by the developer to meet
Apple performance standards. Apple is not responsible for the
operation of this device or its compliance with safety and regulatory
standards. Please note that the use of this accessory with iPhone or
iPad may affect wireless performance.
iPad, iPad Pro, iPhone, and Lightning are trademarks of Apple Inc.,
registered in the U.S. and other countries. iPad mini is a trademark
of Apple Inc. IOS is a trademark or registered trademark of Cisco in
the U.S. and other countries and is used under license.
USB to Micro USB
Charging Cable
Lightning
Connector
Switch Jack 3
Switch Jack 4
FCC
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions may
cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between equipment and receiver.
Consult AbleNet Technical Support or your local Distributor for
help.
One to four switches
with 3.5-mm/1/8-in
mono (TS) switch plugs
are required for use
(not included)
PN 98000045 (07/18 Rev. C - FN 70500211)

Publicité

loading

Sommaire des Matières pour AbleNet Hook+

  • Page 1 Switch Control and apps that have › Consult AbleNet Technical Support or your local Distributor for implemented the Apple iOS UIAccessibility protocol iPad, iPad Pro, iPhone, and Lightning are trademarks of Apple Inc., help.
  • Page 2 Initial Set Up Charging 5. Optional steps for adding switches plugged into Switch Jack 3 and Switch Jack 4: 1. On the iOS, device go to Settings App > General > Accessibility > Hook+ itself does not have an internal battery and does not need to a.
  • Page 3 FCC (CEM) Hook+ est un accessoire d’interface de contacteur conçu pour Les produits AbleNet sont assortis d’une garantie limitée de deux Cet appareil a été testé et a été jugé conforme aux limites imposées une utilisation avec Switch Control sur les iOS 8 ou supérieur.
  • Page 4 Installation initiale Chargement Item) lui sera assigné. Le contacteur branché à la prise jack 2 sera nommé Next et la fonction Passer à l’élément suivant (Move To Next Item) lui sera assignée. 1. Sur l’appareil iOS, allez à Settings App > General >Accessibility > Le Hook+ n’a pas de pile interne et n’a pas à...
  • Page 5 Switch Control konzipiert ist, das auf iOS 8 oder höher zur Klasse B. Diese Grenzwerte dienen dazu, in Wohngebieten einen Für alle von AbleNet hergestellten Produkte gilt eine zweijährige Verfügung steht. Anders als einige Schalter-Interfaces versendet angemessenen Schutz gegen schädliche Störungen sicherzustellen.
  • Page 6 Moduseinstellung Laden v. Die in Schalterbuchse 3 oder Schalterbuchse 4 eingesteckten Schalter müssen manuell konfiguriert und benannt werden, siehe folgende optionale Schritte 1. Rufen Sie auf dem iOS-Gerät in der Einstellungs-App General Hook+ selbst verfügt über keine interne Batterie und muss >...
  • Page 7 Pro, iPad mini, iPhone, y LightningiPhone, iPad son › Consulte con el servicio técnico de AbleNet o con su distribuidor control por botón de iOS y las aplicaciones que han implementado el marcas comerciales de Apple Inc., registradas en los Estados local para recibir ayuda.
  • Page 8 Configuración inicial Carga Seleccionar objeto. El interruptor conectado al conector de conmutador 2 será nombrado como "Siguiente" y se asignará la función "Mover al siguiente objeto". 1. En el dispositivo iOS, vaya a Ajustes> General> Accesibilidad> Hook+ no cuenta con una batería interna y no requiere carga. No v.
  • Page 9 › Os acessórios de interface de comutação que utilizam os eventos › Consulte o suporte técnico da AbleNet ou o seu distribuidor local segurança. Observe que o uso deste acessório com o iPhone ou de controle assistivo são totalmente compatíveis com o Controle para obter ajuda.
  • Page 10 Configuração inicial Adição ou remoção de interruptor 2 seja ativado iv. O interruptor conectado ao conector do interruptor 1 interruptores após a será nomeado Selecione e atribua a função de 1. No dispositivo iOS, vá até Ajustes > Geral > Acessibilidade > Selecionar Item.