Publicité
Les langues disponibles
Les langues disponibles
6. Copy down the 12 digit device password for
each TPL-303E.
Note:
1. DO NOT plug the TPL-303E into a power strip or surge protector.
2. In order for the TPL-303E to see each other, each unit must be on the same circuit
breaker box.
3. A maximum of 8 TPL-303E can be networked.
7. Plug a TPL-303E into an available power outlet.
8. Connect an Ethernet cable from the TPL-303E
to an available LAN port on your router
(e.g. TEW-639GR).
9. Then connect an Ethernet cable from an
available LAN port on your router to your
computer.
10. Plug a second TPL-303E into an outlet where
your remote PC or network appliance is
located.
8
Outlet
Outlet
Publicité
