Adjusting The Spring Force; Notes On Use - Conductix-Wampfler 040836-02,0x1,5 Instructions D'utilisation

Operating Instructions
Balancer
040836-...x1,5
3

Adjusting the spring force

Do not set the spring force to zero.
To increase the tensile force, the spring housing is rotated in
the direction of the cable pull.
4

Notes on use

BAL0402-0002-D/E/F
www.conductix.com
Never jerk hard!
Only adjust the spring force when a load is attached.
The tensile force is decreased in increments by using the lock
pin (C).
Blocking the brake to change
load:
Follow the bow and arrow
principle
Page 10 of 17