unotec SMARTBAND II Mode D'emploi page 4

Product scheme
All manuals and user guides at all-guides.com
2
1
Charging the Smartband
When the low-batt ery icon displays, charge the Smartband by
removing it from the wristband where it is placed. Then con-
nect it to an USB port using the supplied cable as described
below. Connect the cable tu an USB port to begin the charge.
Using the Smartband
- ON/OFF: Touch the red circle and hold it for 3 seconds. The
Smartband will power on. To turn it off touch again the red
circle for 3 seconds. A message with and ON and OFF opti on will appear.
Touch the red circle to select Off and then touch it again and hold it unti l
the Smartband turns off .
- Connecti ng to the Smartband: The fi rst ti me you link your Smartband with
a device, with the bracelet on, open the app and, aft er the noti fi cati ons, it
will look for the device. You can also enter the opti on "Add device". Select
your Smartband when it appears between the available devices. When the
connecti on is ready the Bluetooth logo will display in the Smartband per-
manently. During the device research, the Bluetooth icon in the Smartband
will blink.
In Android devices, you can select in the app the noti fi cati ons you want to
receive.
4
english
1. Wristband
2. Fastener
3. LCD screen
4. Red circle
Installing the app "DayDay Band" in
3
your smartphone
To download the app in your Smartpho-
4
ne, scan the QR code printed in the de-
vice's box or look for the "DayDay Band"
in the Google Play Store for Android
devices or the App Store for iOS devices.