Greenlee HB10 Dynapress Manuel D'instructions page 2

Table of Contents
Description .................................................................... 2
Purpose ......................................................................... 2
Important Safety Information ..................................... 3-5
Identification .................................................................. 6
Hoses and Fittings ........................................................ 7
Hose Connections ......................................................... 7
Typical Setup ................................................................. 7
Operation ....................................................................... 8
Maintenance .................................................................. 9
Troubleshooting ........................................................... 10
Accessories ................................................................. 11
Description
The Greenlee Utility HB10 Dynapress
Booster is a piston-type accessory intended to allow the
use of a high pressure/low flow tool with a low pressure/
high flow hydraulic power source. Compatible with
either Open-Center or Closed-Center hydraulic systems,
the unit takes a hydraulic input of 69 to 152 bar (1000 to
2200 psi) and produces a stable output of 700 bar
(10,000 psi).
The HB10 can be installed in existing two-hose type
hydraulic systems, and does not require a third hydrau-
lic line or separate reservoir. The compact and light-
weight design allows the unit to be easily carried and
used on the ground or in an aerial lift basket. Actuating
the high-pressure circuit of the Dynapress requires a
remote control valve, purchased separately. The instruc-
tions and illustrations in this manual reflect using the
HB10 with either of the following Greenlee Utility remote
control valves:
PVA0021A (Single-Acting Control Valve)
PVA0022A (Double-Acting Control Valve)
The terms "unit" and "booster," when used in this
manual, refer to the HB10. The term "tool" refers to the
device (cable cutter, crimping tool, etc) that is powered
by the HB10.
Greenlee / A Textron Company
All manuals and user guides at all-guides.com
HB10 Dynapress
Safety
Safety is essential in the use and maintenance of
Greenlee Utility tools and equipment. This instruction
manual and any markings on the tool provide informa-
tion for avoiding hazards and unsafe practices related to
the use of this tool. Observe all of the safety information
provided.
Purpose of this Manual
This instruction manual is intended to familiarize
all personnel with the safe operation and maintenance
procedures for the Greenlee Utility HB10 Dynapress
Hydraulic Booster.
Keep this manual available to all personnel.
Replacement manuals are available upon request
at no charge at www.greenlee.com.
Hydraulic
®
Other Publications
Tool Owners/Users
Specifications and Parts Manual:
SAE Standard J1273 (Hose and Hose Assemblies):
All specifications are nominal and may change as design
improvements occur. Greenlee Textron Inc. shall not be liable for
damages resulting from misapplication or misuse of its products.
Dynapress
KEEP THIS MANUAL
2
Hydraulic Booster
®
Publication 99933390
Publication 99930323
® is a registered trademark of Greenlee Textron Inc.
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
®