Uline H-2881 Mode D'emploi

H-2881
TRAFFIC BARRICADE LIGHT
TOOL NEEDED
1/2" Drive Socket
Wrench Attachment
ASSEMBLE LIGHT HEAD
1. Insert four D batteries into plastic casing. (See Figure 1)
Figure 1
2. Insert casing into light assembly until it snaps into
place. (See Figure 2)
Figure 2
CHANGING LIGHT MODE
NOTE: Photocell automatically turns light on at
dusk and off at dawn.
NOTE: Light has three modes – flashing, off and
steady.
NOTE: Light is preset to flashing mode.
PAGE 1 OF 3
1-800-295-5510
uline.com
PARTS
Bolt
ASSEMBLY
ATTACH LIGHT TO TRAFFIC BARRICADE
1. Insert the bolt through the barricade support and
into the light. (See Figure 3)
Figure 3
2. Tighten bolt using wrench attachment.
OPERATION
1. Insert key in hole on front panel. Push key until you
hear a click to turn light to off mode.
2. Push key a second time to turn light to steady mode.
3. Push key again to turn light to off mode.
4. Push key again to return light to flashing mode.
Pour le français, consulter la page 3.
Key
Barricade
Support
NOTE: To rotate light once attached to
barricade, manually twist light head clockwise.
Para Español, vea página 2.
4 D Batteries
(Not Included)
0822 IH-2881