Wiesenfield WIE-FS-205A Manuel D'utilisation page 105

3.6. Troubleshooting
Problem
! CAUTION Do not try to clean rear discharge area when mower is
running. Bodily harm may occur!
Belt slipping
Patches of uncut to
land
Excessive vibration
Gearbox noisy
Blades scalping grass
Uneven cut
Tractor loaded down
by mower
Solution
Unplug and clean mower deck.
Remove belt guard shields and clean
sheaves.
Replace belt
Mow at full throttle (540 PTO rpm),
check PTO speed, and tractor engine.
Shift transmission to a lower gear.
Tighten belts.
Replace missing blades.
Replace blades.
Replace drive belt.
Replace pulleys or align.
Remove belt guard shields & clean debris
from belt area & sheaves.
Check lubricant level.
Raise cutting height by adjusting.
Change broken pattern.
Reduce speed turns.
Shift to a lower gear.
Level mower.
Replace missing blades or hammers.
Mow at full throttle (540 PTO rpm).
Shift to a lower gear.
Clean mower.