Home Decorators Collection HDC60HRV Instructions De Montage page 7

Assembly
3
Hinge Adjustment For Door
Alignment
□ If the doors preassembled to vanity base (B) require adjustment,
follow the below options as needed:
□ To adjust door up or down, loosen screws (a), adjust door and
retighten screws.
To adjust door left and right, turn screw (b) in or out.
□
□ To adjust door in and out, loosen screw (c), adjust door and
retighten screw.
B
4
Vanity Drawer Removal
□ Removing the Drawer:
1. Unload the contents from the drawer.
2. Slide out the drawer as far as it will go.
3. Press the lever down on the right-hand track and lift the lever up on
the left track to release the drawer. Pull the drawer out the rest of the
way.
□ Replacing the Drawer:
1. Align the drawer guides with the receiving glides.
2. Hold the receiving glides firmly and insert the drawer guide.
NOTE: It is normal for the drawer to close tightly the first time after it has
been removed.
3. Push the drawer in completely.
7
Please contact 1-800-986-3460 for further assistance.
HOMEDEPOT.CA/HOMEDECORATORS