ArcticAire AAC060EB1G Guide De L'utilisateur page 13

Operating Instructions
USING THE REMOTE
CONTROLLER
BUTTONS
SWING OPERATION
Use the SWING button to adjust the
Left/Right airflow direction.
ON/OFF MODE
1
1) Press this button while the unit is
TEMP TEMP
UP DOWN
SWING
TIMER
FAN
2) Press the SWING button again to stop
SLEEP
SLEEP OPERATION
• In this mode, the selected temperature
will increase(in cooling mode) / decrease
(in heating mode) by 2°F 30 minutes after
ON/OFF MODE
the mode is selected.
• The temperature will then increase by
TEMP TEMP another 2°F after an additional 30
S
UP DOWN
minutes.
ENERGY
SAVER
• This new temperature will be maintained
FAN TIMER
for 7 hours before it returns to the
1 originally selected temperature. This ends
the Sleep mode and the unit will continue
SLEEP
CLEAN
AIR
to operate as originally programmed.
• The Sleep mode program can be
cancelled at any time during operation
by again pressing the Sleep button.
TIMER OPERATION
press the TIMER button can set the Auto-
start and Auto-stop time of the unit.
NOTE:
• To set Auto-start time, the unit must be in
the OFF position.
• To set Auto-stop time, the unit must be in
the ON postion.
ON/OFF MODE
To set the Auto-start time.
TEMP TEMP
S 1. Push the TIMER button when the unit is
UP DOWN
ENERGY
1
SAVER
2. Keep pressing the TIMER button, each
TIMER
FAN
CLEAN SLEEP 3. The time can be set in a range of 0~12
AIR
4. After the desired time has established,
12
operational, the vertical louvers
automatically swing right and left
sweeping the cold/hot air alternately to
obtain comfortable cooling/heating.
the swing operation.
off, only the Auto-start feature can be set.
press will increase the selected time by
1 hour increments, up to 12 hours.
hours.
wait for about 10 seconds until the
setting temperature reverts back in the
display window of the air conditioner.
This indicates the program is set.