Publicité
PRECAUTIONS
Fuses at the input and outputs of the controller adequately protect
its circuitry in the case of an overload or overvoltage. However, we
recommend that you install an additional protection device on the
controller's supply circuit to prolong the life of the controller.
The room temperature of the room in which the controller is located
MUST ALWAYS REMAIN BETWEEN 32° AND 104°F (0° AND
40°C).
To avoid exposing the controller to harmful gases or excessive
humidity, it is preferable to install it in a corridor.
DO NOT SPRAY WATER ON THE CONTROLLER
3
PF-6.rev.14
Publicité
