Teka CP 15 GS Guide D'utilisation page 23

The relevant installation dimensions are
indicated in mm in the diagrams shown at
the end of this booklet. Proceed as follows:
1. Place the crockery warmer on the shelf
and slide it towards the interior of the
niche in such a way that it is centred and
completely lined up with the front of the
unit.
2.
properly levelled and is sitting evenly on
the shelf.
3. Open the drawer and fix the crockery
warmer to the sides of the unit using the
two screws provided.
All manuals and user guides at all-guides.com
Electrical Connection
The crockery warmer is equipped with a
power cable and plug for single phase
current. We advise that the
connected to a socket that is easily
accessible after installation.
If the crockery warmer is to be installed on
a permanent basis it should be installed by
a qualified technician. In such a case, the
appliance should be connected to a circuit
with an all-pole circuit breaker with a
minimum separation of 3 mm between
contacts.
The data necessary
connection are described on the crockery
must be compatible with those of the power
outlet you are going to use.
WARNING: THE CROCKERY WARMER
MUST BE CONNECTED TO EARTH.
The manufacturer and retailers do not accept
responsibility for any damage that may be
caused to people, animals or property if
these installation instructions are not
observed.
EN
plug is
for the electrical
and these
23