What Is Included; Unpacking Instructions; Safety Instructions - Beka LED Oefoled 200 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

User manual
1.
BEFORE YOU START

1.1 What is included

1 – Oefoled 200
1 - Manual
There is no power cable in the box, this is optional, and will be a cable with powercon true.

1.2 Unpacking Instructions

Immediately upon receiving a fixture, carefully unpack the carton, check the contents to ensure that all
parts are present, and have been received in good condition. Notify the shipper immediately and retain
packing material for inspection if any parts appear damaged from shipping or the carton itself shows
signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be
returned to the factory, it is important that the fixture be returned in the original factory box and packing.

1.3 Safety Instructions

• Please read these instructions carefully, which includes important information about the installation,
usage and maintenance .
• Please keep this User Guide for future consultation. If you sell the unit to another user, be sure that
they also receive this instruction booklet.
• Always make sure that you are connecting to the proper voltage and that the line voltage you are
connecting to is not higher than that stated on decal or rear panel of the fixture.
• This product is intended for indoor and outdoor and has a IP65 rating.
• To prevent risk of fire or shock, do not submerge and follow the rules of the ip65 rating. Make sure
there are no flammable materials close to the unit while operating.
• DO NOT look directly at the light while the fixture is on
• The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent
surfaces. Do not cover the back radiator of this unit.
• Always disconnect from power source before servicing or replacing lamp or fuse and be sure to
replace with same lamp source.
• In the event of serious operating problem, stop using the unit immediately. Never try to repair the unit
by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact
the nearest authorized technical assistance center.
• Always use the same type spare parts. dimmer pack.
• Make sure power cord is never crimped or damaged.
• Never disconnect power cord by pulling or tugging on the cord.
• Don't operate this device under 113° F ambient temperature conditions.
Oefoled 200
8

Publicité

Table des Matières
loading

Produits Connexes pour Beka LED Oefoled 200

Ce manuel est également adapté pour:

Bkl-oefoled200

Table des Matières